Shimana Instruments and Gauges in Canada

These Infrared Thermometers can determine the surface temperature by measuring the amount of infrared energy radiated by the target’s surface.

Portable non-contact tachometers, laser measurements of 10-99.999 RPM.

Can measure AC/DC voltage and current,Resistance, Capacitance, Frequency, Diodes, Continuity

Portable handheld testers designed to determine the indentation hardness of materials ranging from cellular products to rigid plastics. Pocket size models with integrated probe.

Hand held durometer, high-resolution. Shore A, C, D analog durometers.

Low consumption AC clamp meters with stabilize functions, safety operations and reliable performance.

Easy to use digital thickness meters with built in probes to measure Ferrous & Non-Ferrous substrates.

Affordable, dependable force gauges with high accuracy & good resolution. Two types available: inside or outside sensor (S type loadcell), different capacities.

Easy to use AC voltage testers with audio and visual warning signals.

This is a simple gas-leak detector, a very sensitive, self-sufficient warning system that consists of a gas sensor, an acoustic signal generator, a visual status display and power supply.

SHIMANA non-contact, pocket-sized, easy-to-use digital infrared thermometers, -50 to 280°C temperature range, 8:1 optical resolution.

This Digital Multi Meter has 28 different measuring functions. It can measure AC/DC Voltage and Current, Resistance, Capacitance, Transistor, Diode, Continuity.

This compact SHIMANA wood moisture meter with integrated electrode is ideal for use on any construction site.

This RPM Meter is a Digital Photo Tachometer that provides fast and accurate rpm measurements of rotating objects without contact, using laser targeting.

The SHLELX026 Shimana light meter was designed for one hand operation and to fit easily into a tool belt or pocket.

Following is a partial list of the more common gases detected by SHIMANA's Gas Leak Meter: natural gas, propane, butane, methane, acetone, alcohol, ammonia, etc

This SHIMANA Thermo-Hygrometer can measure ambient temperature and relative humidity (0 to 100% RH), as well as temperature via a Type K thermocouple probe.

Handheld laser distance meter for accurate (1.5mm/0.06ft) measurements up to 50m/164ft with several extra-functions like: area/volume calculations, subtractions/additions, 20 measurements memory storage and more.

This compact digital light meter has a wide measuring range and high resolution.

IR Laser Thermometer with integral type K thermocouple input. This Shimana infrared gun provide fast, easy,and accurate readings for most surface temperature measurements with Type K probe and 20 points memory.

Compatible with standards of IEC 651 Type 2, ANSI 1.4 Type 2. Widely used to test the sound level of environment, machinery, vehicle, ship and other noises.

Easy-to-use rotating vane anemometer. With this digital anemometer you can measure wind speed, wind amount, win rate, wave height, temperature.

SHIMANA SE-DT-616CT IR Thermo-Hygrometer can measure ambient temperature, relative humidity (0 to 100% RH), as well as temperature via an infrared temperature probe.

SHIMANA clamp meter that measures both AC and DC current and voltage, plus temperature. True RMS reading permits precise measurements regardless of waveforms.

A single unit that combines the measurement of four key functions: sound, light, humidity and temperature.

Non-destructive moisture meter that is perfect to detect the moisture content in building materials, walls, drywalls, wood, gypsum, cement, ceilings and floors.

Shimana Modern Digital Multimeters has analogue bar graph, True RMS and full range overload protection.

SHIMANA's Portable Gas Detector for Carbon Monoxide has a range of 1 to 1000 ppm CO with a resolution of 1 ppm CO and ±5% or ±10 ppm accuracy, whichever is greater.

The SHGLMM017 moisture meter is a powerful and versatile instrument for measuring and diagnosing dampness in grains.

Multifunctional, one instruments combines PHOTO TACH (rpm) & CONTACT TACH (rpm,m/min,ft/min)

This moisture meter with pin probe is designed to check moisture levels in different kind of materials.

This digital stroboscope can be used for non-contact RPM measurement, inspection and observation of moving parts by "freezing" or "slowing down" the action.

Portable sound source for calibration of sound level meters and other sound measurement equipment

These wheel operated manual test stands are required for tests sensitive to speed variation.

Paint thickness tester gauge that can check coatings on magnetic and non-magnetic substrate, automatically recognizes the type. Great for automotive applications, check the paint thickness on the spot!

Use these hardness test stands (with the LX Durometers Series) to eliminate the speed and weight variables in hardness measurement.

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, tanks, etc. It is widely used in almost all kinds of industries.

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, tanks, etc. It is widely used in almost all kinds of industries.

Basic manually operated stands with lever that can produce a greater amount of travel per revolution - compared with a hand wheel model.

Digital Surface Profile Gauge is an ideal hand held instrument for checking the surface profile. Measuring the correct profile/roughness of a surface is very important for the coating process. This Surface Profile meter will measure surface profiles in mi

The SHGLVM024 Digital Vibration Meter is one of the most useful tools in everyday machinery vibration monitoring. Is compact and can be easily put into your pocket.

Paint thickness gauge that can check coatings on magnetic and non-magnetic substrate, automatically recognizes the type. Great for automotive applications, check the paint thickness on the spot!

Coating thickness digital meter - F & NF type with separate probes.

This Shimana Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments.

This Shimana manual test stand is operated by a hand wheel for great control of the speed variation.

This is widely used in production site to measure surface roughness of various machinery-processed parts, calculate parameters according to selected measuring condition and clearly display all measurement parameters.