Clamp Meters in Canada

A digital clamp meter (clamp-on ammeter) is an electrical tester that combines a voltmeter with a clamp type current meter and can measures electrical current without the need to disconnect the wiring through which the current is flowing (that is possible because the magnetic field produced by a wire is proportional to the electric current passing through it).

Clamp meters are current-measuring tools with some voltage abilities - depending on the model, a clamp-on meter will alow you to measure DC voltage, AC voltage, AC and DC current, resistance, capacitance, frequency and temperature. Some ammeters can also provide a true RMS current measurement of non-sinusoidal or distorted AC waveforms.

AC Clamp Multimeters DUT200
Supplier: Shimana
Part#: DUT200 Series

Low consumption AC clamp meters with stabilize functions, safety operations and reliable performance.

Economical Clamp Meters
Supplier: MTP
Part#: 3093 and 3094

The MTP-3093 Clamp Meter measures 400A AC current, up to 600V AC/DC voltage and resistance, temperature, capacitance and frequency.

True RMS Clamp Meters
Supplier: MTP
Part#: 3095 and 3096

These MTP Clamp Meters feature True RMS technology, a AT III 600 V/ CAT II 1000 V safety rating, measure current, voltage, resistance, temperature, capacitance and frequency.

400A AC True RMS Clamp Meters
Supplier: Fluke
Part#: 320 Series

True RMS measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.

0.5'' (12,7mm) AC/DC Clamp Meter
Supplier: MTP
Part#: ST-337

This Mini Clamp Meter features 1mA high resolution and measures AC/DC current up to 80A as well as 400mV and 600V AC/DC voltage.

True RMS AC/DC Clamp Meters w/ Temperature
Supplier: Shimana
Part#: SHSECM001

SHIMANA clamp meter that measures both AC and DC current and voltage, plus temperature. True RMS reading permits precise measurements regardless of waveforms.

200A True-rms AC/DC Clamp Meter (detachable jaw)
Supplier: Fluke
Part#: 365

Fluke 365 True-RMS AC/DC Clamp Meter features detachable thin and small jaw that meakes it easy to get around tightly packed wires.

True RMS Wireless HVAC Clamp Meter
Supplier: Fluke
Part#: 902 FC

Use the Fluke 902 FC True-rms HVAC Clamp Meter to take essential HVAC measurements, create reports, and collaborate with peers from the work site.

True-RMS Wireless AC/DC Clamp Meters
Supplier: Fluke
Part#: 370 FC Series

The new Fluke 370 FC Series (376 FC, 375 FC and 374 FC) offers advanced troubleshooting performance. Connect your meter to your smartphone using Fluke Connect Measurements app to increase the troubleshooting power of your clamp.

Milliamp Process Clamp Meters
Supplier: Fluke
Part#: 771/772/773

Fluke 771 as well as Fluke 772 and 773 Process Meter measures the output signals from transmitters or mA signals for PLC and control system analog I/O without breaking the loop or bringing down the electrical system.

Earth Ground Clamp Meter
Supplier: Fluke
Part#: 1630-2 FC

With this Fluke clamp on ground resistance tester you can identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system.

Power Quality Clamp Meter
Supplier: Fluke
Part#: 345

The Fluke 345 is a clamp meter, an oscilloscope, a data logger, and a digital power meter all in one.