Tachometers arrow MTP Digital Contact/ Non-Contact Tachometer

Digital Contact/ Non-Contact Tachometer

Part#: AT-8
Supplier: MTP
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

You can use this MTP Digital Tachometer model AT-8 for measuring Rotational Speed (RPM) and Surface Speed with contact or safety non-contact operations.

The MTP AT-8 optical tach is very accurate; it has an extremely compact design for easy carrying around into technician’s pocket or to ensure convenient handheld speed or rotation measurements. 

Simple to use with single button operation the MTP AT-8 is ready to get the job done. Used as non-contact digital tachometer just aim the precision laser beam to the rotating target and take RPM measurements. The values of measurements will be shown instantly on a large and easy to read LCD display.

Thanks to its screw-in contact adapter the MTP AT-8 tachometer gauge is ready for contact operation. You can measure Rotation Speed with contact (RPM), Total Revolutions (REV) or surface Speed, and Length in a wide variety of units.

The MTP AT-8 Digital Tach comes with an internal memory. During measurements can stores statistics such MAX/ MIN value and calculates the Average. 

You can buy online this Handheld Tachometer in Canada or worldwide visiting our online shop at: https://store.dmm.ca/products/mtp-at-8   

MTP AT-8 Features:

  • Measurement types : Rotation Speed (RPM/rpm), Total Revolutions (REV), Frequency (Hz), Surface Speed (m/min, in/min, ft/min, yd/min and Length (m, in, ft, yd)
  • Offers a wide measurement range and high resolution
  • Large easy to read LCD display with backlight
  • 40 readings memory: 10 selectable MAX measurements, 10 selectable MIN
  • measurement, 10 selectable AVG measurements, 10 selectable DATA measurements
  • Laser sighting
  • Accessories: 9V battery, carrying case, contact adapter (funnel, cone, measuring wheel). x03 reflective strips, manual

MTP AT-8 Specifications:

  • Display: 5 digits LCD display
  • Accuracy : (0.05% + 1 digit)
  • Contact Test Range : 2 to 20,000 RPM
  • Non- Contact Test Range: 2 to 99,999 RPM
  • Total Test Range : 1 to 99,999
  • Resolution:
    0.1 RPM (2 to 9999,9 RPM)
    1 RPM (over 10000 RPM)
  • Sampling Time : 0.5 sec. (over 120 RPM)
  • Detecting Distance : 50mm to 500mm.
  • Time Base : Quartz crystal
  • Power Consumption: Approx. 45mA
  • Power Supply: 9V battery
  • Operation Temperature: 0ºC to 50ºC (32 to 122ºF)
  • Weight: 160g
  • Dimensions: 160 x 60 x 42

Need to have this new MTP AT-8 Digital Contact/ Non-Contact Tachometer calibrated? While this gauge has passed a quality control check, having a calibration certificate for tachometers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP tachometers (MTP AT-8 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
AT-8MTP Digital Contact/ Non-Contact Tachometerpiece 2

More Recommendations for Tachometers

Shimpo Contact Handheld Tachometer

Contact Handheld Tachometer
Part#: DT-105A/DT-107A

Shimpo Contact & Non-Contact Tachometer

Contact & Non-Contact Tachometer
Part#: DT-205LR/DT-207LR

Shimana DUT370 Laser Tachometers

DUT370 Laser Tachometers
Part#: DUT37x Series