Infrared Thermometers arrow MTP IR Thermo-Hygrometer with Dew Point

IR Thermo-Hygrometer with Dew Point

Part#: 1324RH
Supplier: MTP
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The MTP 1324RH displays the surface temperature of the measuring surface in the same time with the readings of ambient conditions (air temperature and humidity readings). This IR Thermometer/Dew Point Scanner has dual laser technology and distance to target ratio of 12.  The right-hand side of the display shows the bar graph display to show the risk of mould formation.

The 3-colour warning LED is located above the display. When the LED lights up:
- green, there is no risk of mould formation
- yellow, there is an increased risk of mould formation
- red, there is an acute risk of mould formation, or the measuring surface has already been affected by mould

If the yellow LED lights up, in addition a beep tone will sound. If the red LED lights up, in addition a continuous beep tone will sound.


  • Simultaneous display of IR temperature with ambient conditions (air temperature and humidity)
  • Temperature range: -50 to 260°C (-58 to 500°F)
  • Temperature Accuracy:
    -50 to 20ºC (-58 to 32ºF): ± 0.35 ºC (±6.3°F)
    20 to 260ºC (32 to 500ºF): 1% ± 1 ºC (2.7°F)
  • Relative humidity range: 0 to 100% RH
  • Dew point temperature range: -30 to 100°C (-22 to 212°F)
  • Humidity Range: 0 - 100% RH ± 2 . 5 %
  • Resolution: 0.1
  • Field of view: 12:1
  • Emissivity: 0.95 fixed
  • IR wavelength: 8 – 14 um
  • Laser class: 2
  • Laser wavelength: 630 – 670 nm
  • Max. laser output power: ˂1 mW
  • Operating temperature: 0 to +50°C / +32 to +122°F
  • Operating humidity: 80% RH

Need to have this new MTP 1324RH IR Thermo-Hygrometer with Dew Point calibrated? While this gauge has passed a quality control check, having a calibration certificate for infrared thermometers might be required by your quality control system. Digital Measurement Metrology (owner of is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP infrared thermometers (MTP 1324RH or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
1324RHMTP IR Thermo-Hygrometer with Dew Pointpiece 1

More Recommendations for Infrared Thermometers