Clamp Meters arrow MTP 0.5'' (12,7mm) AC/DC Clamp Meter

0.5'' (12,7mm) AC/DC Clamp Meter



Part#: ST-337
Supplier: MTP
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

Features

  • Clamp size: 0.5''
  • High resolution: 1mA
  • AC/ DC Current Measurement: 80A
  • AC/ DC Voltage Measurement: 400mV to 600V
  • Resistance, frequency, % duty cycle, and capacitance measurements
  • Diode and continuity check
  • Safety standard: CAT III / 600V
  • Data hold
  • Auto Power Off

Specifications:

Functions Range Accuracy
AC Current
(50/60Hz)
4.000 A AC ± (3.0 % + 10 digits)
80 A AC ± (3.0 % + 8 digits)
DC Current 4.000 A DC ± (2.8 % + 10 digits)
80.0  A DC ± (3.0 % + 8 digits)
DC Voltage 400.0 mV DC ± (1.0% + 15 digits)
4.000 V DC  ± (1.0% + 3 digits) 
40.00 V DC ± (1.5% + 3 digits)
400.0 V DC ± (1.5% + 3 digits)
600 V DC ± (2.0% + 3 digits)
AC Voltage
(50/60 Hz)
400.0 mV AC ± (1.0% + 30 digits)
4.000 V AC ± (2.0% + 5 digits)
40.00 V AC ± (2.0% + 5 digits)
400.0 V AC ± (2.0% + 5 digits)
600 V AC ± (2.0% + 5 digits)
Resistance 400.0 Ω ± (1.0% + 4 digits)
4.000KΩ ± (1.5% + 2 digits)
40.00KΩ ± (1.5% + 2 digits)
400.0KΩ ± (1.5% + 2 digits)
4.000MΩ ± (2.5% + 3 digits)
40.00MΩ ± (3.5% + 5 digits)
Capacitance 40.00nF ±(5.0% reading + 30 digits)
400.0nF ±(3% reading + 5 digits)
4.000μF ±(3% reading + 5 digits)
40.00μF ±(3% reading + 5 digits)
100.0μF ±(5.0% reading + 5 digits)
Frequency 5.000 Hz ±(1.5 of reading + 5 digits)
50.00 Hz ±(1.5 of reading + 5 digits)
Duty Cycle 0.5 to 99% ±(1.2% of reading + 2 digits)
500.0 Hz Sensitivity: 10Vrms min
@ 20% to 80% duty Cycle
5.000 kHz
50.00 kHz
500.0 kHz
5.000 MHz
10.00 MHz
Pulse width: 100μs-100ms,
Frequency: 5Hz to 150kHz.
Sensitivity: 10Vrms min.

Need to have this new MTP ST-337 0.5'' (12,7mm) AC/DC Clamp Meter calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP clamp meters (MTP ST-337 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
ST-337MTP 0.5'' (12,7mm) AC/DC Clamp Meterpiece 0

More Recommendations for Clamp Meters