Thickness Meters arrow DeFelsko PosiTector 6000 Coating Thickness Gauges

PosiTector 6000 Coating Thickness Gauges



Part#: PosiTector 6000
Supplier: DeFelsko
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This PosiTector 6000 coating thickness gage for all metal substrates, is a rugged and fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly.

 

DeFelsco PosiTector 6000 probes

PosiTector body accepts all PosiTector 6000 , PosiTector 200 , DPM, PosiTector UTG , RTR and PosiTector SPG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage.

FN probes first attempt a measurement using the magnetic principle and will display a reading with the letter "F" if the coating is non-magnetic over steel. If the coating is non-conductive over metal, then the probe will automatically attempt a measurement using the eddy current principle and display a reading with the letter "N".

Features

  • Ready to measure—no calibration adjustment required for most applications
  • USB port for fast, simple connection to a PC and to supply continuous power (USB cable included);
  • Instantly calculate average, standard deviation, min/max thickness and number of readings while measuring;
  • Accepts all coating thickness probes: (6000/200/PC), environmental (DPM), surface profile (RTR/SPG), and ultrasonic wall thickness (UTG) probes.
  • Enhanced one-handed menu navigation
  • Flip display enables right-side-up viewing
  • Flashing display—ideal in a noisy environment
  • Hi Contrast backlit display for bright or dark environments
  • RESET feature instantly restores factory settings
  • Solvent, acid, oil, water and dust resistant - weatherproof
  • Wear-resistant probe tip
  • Shock-absorbing, protective rubber holster with belt clip
  • Two year warranty on gage body AND probe
  • Certificate of Calibration showing traceability to NIST or PTB included (Long Form)
  • Built-in temperature compensation ensures measurement accuracy
  • Hi-RES mode increases displayed resolution for use on applications that require greater precision
  • Conforms to national and international standards including ISO and ASTM
  • Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero
  • Selectable display languages
  • Extended cables available (up to 75 m/250 ft) for underwater or remote measuring
  • Uses alkaline or rechargeable batteries (built-in charger)
  • Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring
  • HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
  • FAST mode - faster measurement speed for quick inspection;
  • PosiSoft USB Drive stored readings and graphs can be accessed using universal PC/ Mac web browsers or file explorers.
    No software required;
  • PosiSoft 3.0 desktop software (PC/Mac) for downloading, viewing, printing and storing measurement data from DeFelsko inspection instruments. No internet connection required.
  • Free web-based application offering secure storage of thickness readings;

STANDARD BODY

ADVANCED BODY

buy_positector.jpg positector 6000 standard body 

- Hi Contrast Monochrome LCD Display;
- Reading Storage Capacity: 250 in one group;
- USB port for fast, simple connection to a PC and to supply continuous power. USB cable included;

buy_positector.jpg positector 6000 advanced body

- Hi Contrast reversible color LCD
- Multiple stored calibration adjustments for measuring on a variety of substrate conditions;
- SCAN mode: take continuous readings without lifting the probe;
- Reading Storage Capacity: 100,000 in up to 1000 groups;
- Batch Annotation: Create meaningful batch names and enter notes directly on the instrument using a familiar
on-screen QWERTY keyboard;
- SSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min/max levels;
- PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings;
- Real time graphing, picture prompting and batch notes;
- PosiSoft Mobile - allows access  through WiF;

- WiFi technology: connect to a WiFi network to wirelessly synchronizes data for expanded functionality;
- Wireless Access Point: directly connect your smart device or PC without the need for WiFi network access
- Bluetooth Wireless Technology  for data transfer to a PC

PosiTector 6000 - Probe overview

The PosiTector 6000 consists of a Gage body and a probe. A wide selection of interchangeable probes are available.  All PosiTector Coating Thickness bodies accept all probes. You can switch between probes quickly and easily. For example, you can switch from a ferrous built-in probe to a non-ferrous microprobe.

  • ferrous and non-ferrous probesFully interchangeable probes: Ferrous, non-ferrous, combination, thick, thin, etc are compatible with all gage bodies
  • No calibration adjustment required for most applications;
  • Certificate of Calibration (Long Form) traceable to NIST or PTB included with every PosiTector probe;
  • Heavy-duty, gold-plated locking connector for industrial environments
  • Ideal for measuring paint, powder, etc on all metalsand measuring galvanizing, planting, andoizing and more;
  • Regular separate probes for PosiTector 6000 are suitable for underwater use;
  • PosiTector Probes are available for a veriety of applications;
  • Optional Extended Calbles for underwater or remote measuring. (up to 75 meters / 250 feet);
  • Two year prove warranty;
  • All probes are PosiTector SmartLink compatible - wirelessly connect PosiTector 6000 probes to your smart device
  • F - for ferrous metals (steel and cast iron)
  • N - for non-ferrous metals (aluminum, copper, titanium, etc.)
  • FN - for all metal substrates - Automatically recognizes the substrate and takes a measurement
Select from a variety of measurement ranges and probe styles:

Two Probe Styles:

  • Built-in - sensor protrudes from bottom of probe connector
  • Separate - sensor is attached to the probe connector by a 1.2 meter (3 foot) cable. (Extended cables lengths available.)
positector high range probes positector regular probes positector removable probe positector separate microprobes
High-Range Probes
(FT, FTS, FNTS, FKS, NKS)
Separate Regular Probes
(FS, NS, FNS, NAS, FTS)
Removable Built-in probes
(F, N, FN, FT)
Separate 90° Microprobes
(F90S, N90S)
Ideal for thick protective coatings such as epoxy, rubber, concrete liners,
intumescent fireproofing and more.

These constant-pressure, stainless steel probes are hermetically sealed to be totally waterproof - ideal for underwater use.
Ideal for one-handed operation.
Right angle probe for measuring within areas of low headroom. Ideal for measuring on small parts, hard-to-reach areas, or close to edges.
 
positector with fxs extreme probe
 
Probe Pre-Ordering Guide:
F - for ferrous metals (steel and cast iron)
N - for non-ferrous metals (aluminum, copper, titanium, etc.)
FN - for all metal substrates - Automatically recognizes the substrate and takes a measurement
Probe Model Substrates Probe Style Measuring Range
F ferrous removable built-in 0 - 60 mils (0 - 1500 um)
FS ferrous regular separate 0 - 60 mils (0 - 1500 um)
FXS Xtreme™ ferrous regular separate 0 - 60 mils (0 - 1500 um)
FRS ferrous 90° regular separate 0 - 60 mils (0 - 1500 um)
F0S ferrous 0° microprobe 0 - 45 mils (0 - 1150 um)
F45S ferrous 45° microprobe 0 - 45 mils (0 - 1150 um)
F90S ferrous 90° microprobe 0 - 45 mils (0 - 1150 um)
FT ferrous removable built-in 0 - 250 mils (0 - 6 mm)
FTS ferrous high-range separate 0 - 250 mils (0 - 6 mm)
FKS ferrous high-range separate 0 - 500 mils (0 - 13 mm)
FHXS Xtreme™ ferrous high-range separate 0 - 400 mils (0 - 10000 um)
FLS ferrous high-range separate 0 - 1.5 inches (0 - 38 mm)
N non-ferrous removable built-in 0 - 60 mils (0 - 1500 um)
NS non-ferrous regular separate 0 - 60 mils (0 - 1500 um)
NRS non-ferrous 90° regular separate 0 - 60 mils (0 - 1500 um)
NAS non-ferrous regular separate 0 - 25 mils (0 - 625 um)
N0S non-ferrous 0° microprobe 0 - 25 mils (0 - 625 um)
N45S non-ferrous 45° microprobe 0 - 25 mils (0 - 625 um)
N90S non-ferrous 90° microprobe 0 - 25 mils (0 - 625 um)
NKS non-ferrous high-range separate 0 - 500 mils (0 - 13 mm)
FN ferrous / non-ferrous combo removable built-in 0 - 60 mils (0 - 1500 um)
FNS ferrous / non-ferrous combo regular separate 0 - 60 mils (0 - 1500 um)
FNRS ferrous / non-ferrous combo 90° regular separate 0 - 60 mils (0 - 1500 um)
FNTS ferrous / non-ferrous combo high-range separate 0 - 250 mils (0 - 6 mm)
FNGS ferrous / non-ferrous high-range separate 0 - 2.5 inches (0 - 63.5 mm)

 

Software and analyzing data

posisoft3Desktop software for downloading, viewing, printing and storing measurement data from DeFelsko inspection instruments. No internet connection required.

The PosiSoft suite of software solutions offers 4 FREE ways to view and report your data, ranging from dedicated desktop software for PC and Mac computers to cloud-based PosiSoft.net.

    PosiSoft® 3.0 Desktop Software
  • Import (download) measurement data
    via USB (all gages) or WiFi (PosiTector Advanced models only)
  • Customize reports
    by adding pictures, logos, screen captures, notes and more
  • Storing and sharing data on a network or cloud-drive
    Measurement data is copied (imported) from the instrument to a user selectable location
  • Custom layouts
    Using a simple drag and drop Template Design toolbox; save layouts for future use
  • Comma-separated text files
    Downloaded data is stored in comma-separated text files which can easily be imported into supporting applications such as documents, spreadsheets and databases
 posisoft_net.jpg posisoft_usb_drive.jpg posisoft mobile

PosiSoft®.net
- Synchronize measurement data when connected via USB, Bluetooth or WiFi wireless technology
- Generate reports with graphs, annotations and images;
- Share measurement data with authorized users via a secure login from any computer or web-enabled device;
- Export data to popular formats such as XML, .CSV (comma-separated
values), and CQATK for further
analysis;
- Securely stores data in the cloud
- Synchronize images and batch
notes to your PosiTector
- Compatible with PosiTector SPG/DPM/6000/200/UTG Standard & Advanced instruments
- Internet connection required

PosiSoft® USB Drive
- Access your PosiTector as a flash drive;
- View and print readings and graphs
using universal PC/Mac web browsers or file explorers;
- Comma-Separated Text Files
Measurement data is stored in commaseparated text files which
can easily be imported into supporting applications such as documents, spreadsheets and databases;
- Simple file management
copy and paste data from the PosiTector to a local folder on your computer, network or cloud-drive.

PosiSoft Mobile
- Browse stored measurement data including notes, images, statistics
and charts;
- Update batch names/notes using your mobile device’s keyboard
- Insert images directly into gage batches using your mobile device’s
camera or image library
- Remotely view the live display of a working PosiTector
- Email data as PDF reports or .CSV comma-separated text files
- Accessible from any WiFi enabled computer or smart device using a
standard web browser including PC/Mac, Windows Phone/Mobile,
Blackberry, Android, Apple iOS and more



How to order

buy defelsko positector 6000

ALL GAGES COME COMPLETE with precision plastic shim(s), protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, instructions, convenient carrying case, protective lens shield, Long Form Certificate of Calibration traceable to NIST or PTB, USB cable, two (2) year warranty.

  • SIZE: 137 x 61 x 28 mm (5.4" x 2.4" x 1.1")
  • WEIGHT: 140 g (4.9 oz.) without batteries
  • CONFORMS TO: ISO 2178/2360/2808, PrEN ISO 19840, ASTM B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2 and others

Need to have this new DeFelsko PosiTector 6000 PosiTector 6000 Coating Thickness Gauges calibrated? While this gauge has passed a quality control check, having a calibration certificate for thickness meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old DeFelsko gauge to be calibrated? We might be able to calibrate DeFelsko thickness meters (DeFelsko PosiTector 6000 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
PosiTector 6000DeFelsko PosiTector 6000 Coating Thickness Gaugespiece 0

More Recommendations for Thickness Meters