Infrared Thermometers arrow Fluke Accurate IP54 Infrared Thermometers

Accurate IP54 Infrared Thermometers



Part#: 62MAX/MAX+
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

With this FLUKE 62 MAX gun thermometer, the technicians can make the measurements from 30°C to 500°C with an accuracy of ± 1.5% of the reading and 10:1 distance to spot ratio. Both Fluke 62MAX infrared thermometers offers higher IP protection level against environmental factors such dust ingress and splash water from any direction as well as rugged performance. These models survive 9.8 foot/3 meter drops to wood floors making them ideal for the harsh conditions faced by technicians in HVAC, electrical service, industrial processes or facilities maintenance applications.

You will get even more with FLUKE 62MAX+.  The measurements using this FLUKE non-contact Temperature Gun also does not require making contact with the surface being measured. Moreover the MAX PLUS infrared food thermometer has an increased distance-to-spot ratio of 12:1 to make the measurements more far away from moving machinery or live electrical connections but with a better accuracy of ± 1.0% of the reading. FLUKE 62MAX+ laser thermometer gun comes also with higher non-contact temperature range (30°C to 650°C) and dual, rotating lasers to accurately identify the spot size.

Features

  • Measure -30°C to 500°C (-22°F to 932°F) for Fluke 62 MAX and -30°C to 650°C (-22°F to 1202°F) for Fluke 62 MAX+
  • Extremely accurate: up to +1.0°C or +1.0% of reaching (Fluke 62 MAX+)
  • IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites.
  • Strong enough to withstand a 3 m drop. No worry even if you work from a ladder.
  • Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.
  • Up to 12:1 Distance to spot (Fluke 62 MAX+): Precise laser technology makes for more accurate and repeatable measurements.
  • Dual lasers: The 62 MAX+ has dual lasers to help you identify area to be measured.
  • Large, backlit display: Large screen makes data easier to read, even in dark areas.
  • Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
  • Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.
  • Power: Both the 62 MAX and 62 MAX+ are powered by a single, standard AA battery.
  • 3 years warranty

Specifications

 

FLUKE 62MAX

FLUKE 62MAX+ (MAX PLUS)

Temperature range

-30°C to 500°C (-22°F to 932°F)

-30°C to 650°C (-22°F to 1202°F)

Accuracy

±1.5°C or ±1.5% of reading, whichever is greater
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0

±1.0°C or ±1.0% of reading, whichever is greater
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0

Response time (95%)

< 500 ms (95% of reading)

Spectral response

8 to 14 microns

Emissivity

0.10 to 1.00

Optical resolution

10:1 (calculated at 90% energy)

12:1 (calculated at 90% energy)

Display resolution

0.1°C (0.2°F)

Repeatability of readings

±0.8% of reading or < ±1.0°C (2°F), whichever is greater

±0.5% of reading or <±0.5°C (1°F), whichever is greater

Power

AA battery

Battery life

10 hours with laser and backlight on

Physical Specifications

Weight

255 g (8.99 oz)

Size

175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)

Operating temperature

0°C to 50°C (32°F to 122°F)

Storage temperature

-20°C to 60°C (-4°F to 140°F), (without battery)

Operating humidity

10% to 90% RH non-condensing at 30°C (86°F)

Operating altitude

2000 meters above mean sea level

Storage altitude

12,000 meters above mean sea level

IP rating

IP 54 per IEC 60529

Drop test

3 meters

Vibration and shock

IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms

EMC

EN 61326-1:2006 EN 61326-2:2006

Standards and agency approval

Compliance

EN/IEC 61010-1:2001

Laser safety

FDA and EN 60825-1 Class II


Need to have this new Fluke 62MAX/MAX+ Accurate IP54 Infrared Thermometers calibrated? While this gauge has passed a quality control check, having a calibration certificate for infrared thermometers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke infrared thermometers (Fluke 62MAX/MAX+ or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Temperature range AccuracyIn Stock
62MAXInfrared Thermometer -30°C to 500°C (-22°F to 932°F) ±1.5°C or ±1.5% of reading, whichever is greater 1
62MAX+Infrared Thermometer -30°C to 650°C (-22°F to 1202°F) ±1.0°C or ±1.0% of reading, whichever is greater 1

More Recommendations for Infrared Thermometers