| Infrared Measurements |
| Infrared temperature range |
-30°C to 900°C (-22°F to 1652°F) |
| IR accuracy (calibration geometry with ambient
temperature 23°C ± 2°C) |
≥ 0°C: ± 1°C or ± 1% of the reading, whichever is greater |
| ≥ -10°C to < 0°C: ±2°C |
| < -10°C: ±3°C |
| ≥ 32°F: ± 2°F or ± 1% of the reading, whichever is greater |
| ≥ 14°F to < 32°F: ±4°F |
| < 14°F: ±6°F |
| IR repeatability |
±0.5% of reading or ±0.5°C (±1°F), whichever is greater |
| Display resolution |
0.1°C / 0.1°F |
| Distance: Spot |
60:1 (calculated at 90% energy) |
| Minimum spot size |
19 mm |
| Laser sighting |
Offset dual laser, output < 1 mW |
| Spectral response |
8 μm to 14 μm |
| Response time (95%) |
< 500 ms |
| Emissivity |
Digitally adjustable from 0.10 to 1.00 by 0.01 or via built-in table
of common materials |
| Contact Measurements |
| K-type thermocouple input temperature range |
-270°C to 1372°C (-454°F to 2501°F) |
| K-type thermocouple input accuracy (with ambient
temperature 23°C ± 2°C) |
< -40°C: ±(1°C + 0.2° / 1°C) |
| ≥ -40°C: ±1% or 1°C, whichever is greater |
| < -40°F: ±(2°F + 0.2° / 1°F) |
| ≥ -40°F: ±1% or 2°F, whichever is greater |
| K-type thermocouple |
0.1°C / 0.1°F |
| K-type thermocouple repeatability |
±0.5% of reading or ±0.5°C (±1°F), whichever is greater |
| Measurement Options |
| Hi/Low alarms |
Audible and two-color visual |
| Min/Max/Avg/Dif |
Yes |
| Switchable celsius and fahrenheit |
Yes |
| Backlight |
Two levels, normal and extra bright for darker environments |
| Probe input |
K-type thermocouple simultaneous display of probe and IR temperature |
| Trigger lock |
Yes |
| Data storage |
99 points |
| Display |
Dot matrix 98 x 96 pixels with function menus |
| Communication |
USB 2.0 |
| K-Type Thermocouple Specifications |
| Measurement range (bead probe) |
-40°C to 260°C (-40°F to 500°F) |
| Accuracy |
±1.1°C (±2.0°F) from 0°C to 260°C (32°F to 500°F). Typically within
1.1°C (2.0°F) from -40°C to 0°C (-40°F to 32°F) |
| Cable length |
1 m (40 in) K-type thermocouple cable with standard miniature
thermocouple connector and bead termination |
| General Specifications |
| Safety and compliance |
IEC 60825-1
FDA Laser Class II
IEC 61326-1
CE Complaint
CMC # 01120009 |
| Operating temperature |
0°C to 50°C (32°F to 122°F) |
| Storage temperature |
-20°C to 60°C (-4°F to 140°F) |
| Relative humidity |
10% to 90% RH non-condensing up to 30°C (86°F) |
| Operating altitude |
2000 meters above mean sea level |
| Weight |
0.322 kg (0.7099 lb) |
| Power |
2 AA batteries |
| Battery life |
8 hours with laser and backlight on; 100 hours with laser and
backlight off, at 100% duty cycle (thermometer continuously on) |
Fluke High-Temperature Infrared Thermometer
High-Temperature Infrared Thermometer (0,95 MB)
