Clamp Meters arrow Fluke Earth Ground Clamp Meter

Earth Ground Clamp Meter



Part#: 1630-2 FC
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The Fluke 1630 Earth Resistance Tester is a hand-held battery-operated Earth Ground Clamp Meter that measures the ground resistance of a ground rod without using auxiliary ground rods. The Clamp can be used in multi-grounded systems without disconnecting the ground under test and enables non-intrusive leakage current measurement.
 
Stakeless measurement
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don’t have access to soil to place auxiliary test stakes.
Fluke Connect® Wireless System
The 1630-2 FC supports the Fluke Connect Wireless System (may not be available in all regions). Fluke Connect wirelessly connects the clamp with an app on your smartphone or tablet. The app shows the ground resistance measurements on your smartphone or tablet display. You can save these measurements, GPS location from your phone and images to Fluke Connect Cloud storage and share with your team. 

Features 

  • Earth ground ac leakage current measurement: Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
  • Rugged: Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
  • Logging measurements: The earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval. Saves time by recording and storing measured values.
  • Alarm threshold: User-defined high/low alarm limits, for rapid measurement evaluation
  • Band-pass filter: Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement. 

Specifications:

  • Maximum voltage to earth ground: 1000 V
  • Frequency range 40 Hz to 1 kHz
  • Battery life: More than 15 hours (In Ground Resistance measurement mode, with backlight turned off, and RF mode turned off)
  • view full Fluke 1630-C FC Specfications

Need to have this new Fluke 1630-2 FC Earth Ground Clamp Meter calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke clamp meters (Fluke 1630-2 FC or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
1630-2 FCFluke Earth Ground Clamp Meterpiece 0

More Recommendations for Clamp Meters

MTP True RMS Clamp Meters

True RMS Clamp Meters
Part#: 3095 and 3096

MTP Economical Clamp Meters

Economical Clamp Meters
Part#: 3093 and 3094