Clamp Meters arrow Reed (Discontinued) AC/DC Clamp Meters
Price: $0.00

(Discontinued) AC/DC Clamp Meters



Part#: IT-ST-333
Supplier: Reed
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This REED AC/DC Clamp Meters w/ Temphas been discontinued and replaced with the SHIMANA Clamp Multimeter – can measure AC/DC voltage, AC current, resistance, frequency, temperature (only DUT206A model), duty cycle (only DUT205A model). This page is for reference only.

IT-ST-333 is an autoranging AC/DC clamp meter with temperature measurements to 1000°C. This Reed clamp meter comes complete with test leads, type K thermocouple wire probe, batteries and carrying case.

features

  • can measure AC/DC current and voltage
  • can measure temperature (type K probe)
  • duty cycle function
  • 4000 count LCD display with backlight
  • Data Hold and Zero function
  • auto shutt off and low battery indicator
  • diode test and continuity check
  • capacitance to 100F

specs

  AC DC
Current Range 40.00, 400.0A 40.00, 400.0A
Voltage Range 400.0mV, 4.000, 40.00, 400.0, 600V 4.000, 40.00, 400.0, 600V
Resistance Range 400.0Ω, 4.000, 40.00, 400.0kΩ, 4.000, 40.00MΩ
Capacitance Range 40.00, 400.0nF, 4.000, 40.00, 100.0µF
Frequency Range 5.000, 50.00, 500.0Hz, 5000, 50.00, 150.0kHz
Duty cycle 0.5 to 99.0%
Temperature Range -50 to 1000°C
Power supply 2 x AAA 1.5 batteries
Jaw opening 0.9" (23mm)
Dimensions 205 x 70 x 37mm
Weight 200g

Need to have this new Reed IT-ST-333 (Discontinued) AC/DC Clamp Meters calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Reed gauge to be calibrated? We might be able to calibrate Reed clamp meters (Reed IT-ST-333 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
IT-ST-333Reed (Discontinued) AC/DC Clamp Meterspiece $0.001


or contact us for technical assistance on
(Discontinued) AC/DC Clamp Meters.

More Recommendations for Clamp Meters

Reed True RMS Clamp On Multimeter

Price: $249.00
Part#: IT-CM-9930

Shimana AC Clamp Multimeters DUT200

From: $98.00
Part#: DUT200 Series

Shimana True RMS AC/DC Clamp Meters w/ Temperature

Price: $195.00
Part#: SHSECM001
 
 
Â