Clamp Meters arrow Shimana AC Clamp Multimeters DUT200

AC Clamp Multimeters DUT200

Part#: DUT200 Series
Supplier: Shimana
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

DUT205A/DUT206A are a low consumption AC clamp meter with stabilize functions, safety operations, and reliable performance.
In addition to the AC current feature, Shimana clamp multimeters can also measure AC/DC voltages, resistance, diode, continuity, frequency, duty cycle (DUT205A) and temperature (DUT206A).

These Clamp Meters complies with the standards IEC61010: in pollution degree 2, overvoltage category (CAT. II 600V / CAT III 300V) and double insulation:

  • CAT II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient voltage overvoltages than CAT. III
  • CAT. III: Distribution level, fixed installation, with smaller transient overvoltages than CAT. IV.
Please see below for complete specs.


  • can measure AC/DC voltage, AC current, resistance, frequency, temperature (only DUT206A), duty cycle (only DUT205A)
  • autoranging clamp meters
  • diode test and conitnuity check (with buzzer)
  • 3999 count LCD display with backlight
  • data hold


Basic Functions Range Best Accuracy
AC Voltage 4V/40V/400V/600V ±(1.2%+5)
DC Voltage 400mV/4V/40V/400V/600V ±(0.8%+1)
AC Current 400A/1000A ±(1.5%+5)
Resistance 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
Frequency 10Hz ~ 10MHz ±(0.1%+3)
Temperature -40°C ~ 1000°C (only DUT206A) ±(2%+8)
Duty cycle 0.1% ~ 99.9% (only DUT205A)  

Special Functions  
  Auto Ranging
  Diode test
  Continuity Buzzer
  Relative mode
  Data Hold
  Sleep mode and low battery display
  Full icon display
  Input impedance for DC voltage ~ 10MΩ

Max display 3999
LCD size 37 x 18mm
Power supply 9V battery
Dimensions 236 x 97 x 40mm
Weight 350g

standard delivery

  • Carrying Bag
  • Test Lead
  • Operating Manual
  • Battery

Need to have this new Shimana DUT200 Series AC Clamp Multimeters DUT200 calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana clamp meters (Shimana DUT200 Series or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Temperature Duty CycleIn Stock
DUT205ADUT205A Clamp Meter no yes 22
DUT206ADUT206A Clamp Meter yes no 0

More Recommendations for Clamp Meters

MTP Economical Clamp Meters

Economical Clamp Meters
Part#: 3093 and 3094

MTP True RMS Clamp Meters

True RMS Clamp Meters
Part#: 3095 and 3096