Vibration Meters arrow Fluke Vibration Meter

Vibration Meter

Part#: 805FC
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The 805 Vibration Meter with Fluke Connect ShareLiveTM is Fluke’s multifunction vibration screening tool that lets you stay in contact with your entire team providing quantifiable results of bearing condition, overall vibration, and IR temperature*.

The Fluke 805 performs in the low frequency range to measure overall vibration and in the high frequency range to identify bearing faults. In addition to providing a number, the 805 provides a four-level scale for both overall vibration and bearings.

Users can send measurement data directly to their entire team using Fluke Connect with ShareLive video calls*, or export measurements from the 805 Vibration Meter to an Excel template on their PC in order to trend the overall vibration, CF+, and IR temperature.

The 805 measures:

  • Overall vibration (low frequency: 10 Hz to 1,000 Hz) for overall machine health.
  • Crest Factor+ (high frequency: 4,000 Hz to 20,000 Hz) for bearing condition.
  • IR temperature for a broader understanding of machine health.

With the 805 Vibration Meter, users can use the severity assessment and trending functionality to overcome this obstacle. After measurements are taken on the operator rounds, the results can be easily uploaded into Excel. The user can trend with preconfigured Excel templates and plot graphs and compare the overall vibration readings to ISO Standards (10616-1, -3 and -7). 


  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using pre-built templates
  • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
  • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
  • Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect® Share-Live™ video call*
  • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
  • On-board memory holds and saves up to 3,500 measurements
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing



  • Sensitivity (typical): 100 mV / g ±10 %
  • Measurement Range: 0.01 g to 50 g
  • Frequency Range: 10 Hz to 1,000 Hz and 4,000 Hz to 20,000 Hz
  • Resolution: 0.01 g
  • Accuracy (typical)at 100 Hz: ±5 % of measured value
    Amplitude Units
  • Acceleration: g, m/sec2
  • Velocity: in/sec, mm/sec
  • Displacement: mils, μm 
  • See Fluke 805FC specs


What's included

  • Fluke 805 FC Vibration Meter
  • USB cable
  • Storage case
  • Belt holster
  • Quick reference guide
  • CD-ROM (includes MS Excel template and documentation)
  • Two (2) AA batteries

Need to have this new Fluke 805FC Vibration Meter calibrated? While this gauge has passed a quality control check, having a calibration certificate for vibration meters might be required by your quality control system. Digital Measurement Metrology (owner of is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke vibration meters (Fluke 805FC or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
805FCFluke Vibration Meterpiece 0

More Recommendations for Vibration Meters