Test stands arrow Shimana Vertical Lever Manual Test Stand

Vertical Lever Manual Test Stand

Part#: SHWSTS034
Supplier: Shimana
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The Shimana SHWSTS034 is a lever operated manually stand especially designed to match the Shimana SH Digital Force Gauges but can be adapted for other force gages as well. The test stand can be used for various testing purposes such as tension/compression test, connector insertion/withdraw tests and fracture tests.

The height of test stand can be adjusted. Push pull gauge can be moved up and down. Compared with a hand wheel test stand this Vertical Lever Manual Test Stand can produce a greater amount of travel per resolution.

Various grips and fixtures are available for use with these test stands, which vary based on the sample being tested.




Capacity 500 N
Stroke 70mm
Dimensions 240 x 150 x 400 mm (L x W x H)

Need to have this new Shimana SHWSTS034 Vertical Lever Manual Test Stand calibrated? While this gauge has passed a quality control check, having a calibration certificate for test stands might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana test stands (Shimana SHWSTS034 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
SHWSTS034Shimana Vertical Lever Manual Test Standpiece 1

More Recommendations for Test Stands