Test stands arrow Chatillon UTSM Motorized Test Stand

UTSM Motorized Test Stand

Part#: UTSM
Supplier: Chatillon
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

Sorry.  The Chatillon UTSM Series Testers is obsolete and no longer available.  The replacement tester is: TCM201 Series (225 lbf, 500 N).

Chatillon motorized UTSM 500 lb universal test stand delivers high-performance characteristics needed in exacting laboratory and production tests.

This versatile 500 lb test stand permits accurate and dependable measurements for compressive or tensile strength of springs, wire, rubber, aluminum, catalysts, cosmetics, pills, plastics, switches and paper, as well as many specialized applications. The test stand accommodates Chatillon force gauges as the readout.


  • Capacity: 500lb 
  • The UTSM is operated by 115 Vac 50/60 cycles. The DC gear-motor maintains constant platform speeds under varying loads. (220 Vac operation available.)
  • Standard travel speed is adjustable from 1" per minute to 12" per minute. Standard vertical travel distance is 6".
  • Operator may override a set speed by use of a three position selector switch: maximum, minimum, or variable speed may be selected.
  • A heavy duty up/down switch controls platen travel. Drive screw is self locking; holds rated load without slipping.
  • A circuit breaker protects the motor against overload damage.
  • Ram platform is adjustable for maintaining parellelism with compression plate on force gauge.
  • Horizontal clearance between columns is 8': Carriage platen is 6" wide x 3" deep.
  • Can be used in vertical or horizontal position.

Chatillon's maintenance free UTSM test stand design utilizes a tough aluminum casting with oilite bearings. Teflon impregnated bronze bearings in the travel carriage and gauge support housing increases cycle life. ARMOLOY plated, hardened steel columns are 1" diameter x 29" high.

NOTE: this Chatillon motorized test stand is sold as is. Remote loadcell force gauge is extra.

Need to have this new Chatillon UTSM UTSM Motorized Test Stand calibrated? While this gauge has passed a quality control check, having a calibration certificate for test stands might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Chatillon gauge to be calibrated? We might be able to calibrate Chatillon test stands (Chatillon UTSM or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
UTSMChatillon UTSM Motorized Test Standpiece 0

More Recommendations for Test Stands