TCM201 Motorized Force Tester

The Chatillon® TCM-201 Series of motorized test stands offer customers an easy-to-operate motorized testing system that is precise enough for the laboratory and rugged enough for the production floor.

Please note: this is an obsolete model, information shown here is for reference only. The TCM-201 test stand has been replaced by Chatillon CS225 Digital Force Tester.

Stands feature an all-metal construction with ball screw and dual support columns for positive motor control and minimal deflection. Manually adjustable limits stop crosshead travel at precise user specified locations. Rotary dials are easy to operate and allow the user to specify speed requirements and test mode. Dedicated function keys provide fast motion control adjustment (up, down, stop). Units operate in four modes: single cycle at upper limit, single cycle at lower limit, continuous cycling between limits, and manual. A selector switch is provided for specifying return speed after testing.

With a 225 lbf capacity the TCM201 Series test stands can be used with a force gauge for compression or tension tests.

features

• Selectable Speed Controls
  • Slow Speed Model - 0.02 to 0.5 in/min (0.5 to 12.5 mm/min)
  • Standard Speed Model - 0.5 to 12.5 in/min (12.5 to 312.5 mm/min)
  • Medium Speed Model - 0.1 to 2.5 in/min (2.5 to 62.5 mm/min)
  • High Speed Model - 1.0 to 25.0 in/min (25.0 to 625.0 mm/min)
• Independent Return Speed
• Selectable Operating Modes
  • Single Cycle at Upper Limit
  • Single Cycle at Lower Limit
  • Continuous cycling between Limits
• Manual Mechanical Limits
• Ball Screw Design
• Lightweight & Portable

dimensions

specs

Please note: this is an obsolete model, information shown here is for reference only. The TCM-201 test stand has been replaced by Chatillon CS225 Digital Force Tester.