Calibration Certificate: is available at extra cost
Surface Profile Gauge User Manual (170,02 KB)
Photo Gallery - click any photo to enlarge
Digital Surface Profile Gauge is an ideal hand held instrument for checking the surface profile. Measuring the correct profile/roughness of a surface is very important for the coating process. This Surface Gauge reads in μm and mils.
features
specs
Technical Specs
Range
0 μm to 800 μm (0 mils
to 30 mils)
Accuracy
±5% or
±5 μm,
(whichever is the greater)
Resolution
1 μm (0.1 mils)
Measuring
units
μm / mils
Measurement speed
>30 readings per minute
Power supply
4 x1.5v (AAA) Batteries
Case
High impact ABS
Operating
Temperature
0°C to 40°C / 32°F to
104°F
Dimensions
162×65×28mm (6.38" x 2.55" x 2.10")
Weight
280 g
Need to have this new Shimana SHGLST129 Surface Profile Gauge calibrated? While this gauge has passed a quality control check, having a calibration certificate for surface gauges and testers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.
Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana surface gauges and testers (Shimana SHGLST129 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.
Ordering info
More Recommendations for Surface Gauges And Testers
Shimana Surface Profile Gauge
Surface Profile Gauge User Manual (170,02 KB)
