Sound Level Meters arrow Shimana Multifunctional Leq Sound Level Meter

Multifunctional Leq Sound Level Meter



Part#: SHGLSL021
Supplier: Shimana
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This Multifunctional Sound Level Meter is compatible with standards of IEC 651 Type 2,ANSI 1.4 Type 2." The SHGLSL021 DB Meter is widely used to test the sound level of environment, machinery, vehicle, ship and other noises.

The software and RS232 cable can be purchased separately.

features

  • Multifunctional - it offers 4 measurement parameters:
    • Lp (sound level)
    • Leq (Equivalent Continuous A Sound Level)
    • Lmax (Maximum Sound Level)
    • LN (Percent of all readings over alarm value set)
  • Compatible with standards of IEC 651 Type 2, ANSI 1.4 Type 2
  • With alarm set and alarm output
  • This meter permits choice of 'A', 'C', or 'Flat' weighting and 'Slow' / 'Fast' response times
  • DC output: 0~1.3V10mV/dB
  • Auto range selection and digital display with no guessing errors
  • Manual or automatic shut down. The tester can be switched off by pressing the power key at any time. On the other hand, The tester can be set to auto power off between 1 to 9 minutes or disable auto power off
  • The sound tester can memorize 30 groups of measurement results and measuring conditions for later use or download to PC
  • Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface
Available also as a kit, including Sound Level Calibrator
sound-level-calibrator.jpg 

specs

  • Display:14mm (0.55 ) LCD with backlight
  • Parameters measured: Lp, Lmax, Leq , LN
  • Measurement range:
    • Lp: 30~130dB (A), 35~130dB (C), 35~130 dB (F)
    • Leq: 30-130dB (10s, 1min, 5min, 10min, 15min, 30min, 1hour, 8hour, 24hour)
    • LN : 0-100%
  • Resolution: 0.1 dB
  • Accuracy: 1dB
  • Frequency weighting:'A', 'C', 'F' (Flat)
  • Time weighting:
    • Fast (125ms)
    • Slow (1 second)
  • Microphone:1/2 inch electret condenser type
  • Memory: 30 groups with measuring conditions
  • Built in calibration signal: 94dB at 1kHz (sinusoidal)
  • Frequency range: 20 to 12,500 Hz
  • Alarm value set: 30-130 dB
  • Alarm output: LED and optional relay contact (NC)
  • PC interface: RS232C
  • Low battery indication
  • Power supply: 4x1.5v AAA battery
  • External DC power supply: 6 V DC, 100mA (not included)
  • Size: 236x63x26 mm / 9.3x2.5x1.0inch
  • Weight: 170g (including batteries)

standard delivery

  1. Main Unit ...1pc
  2. Carrying Case ...1pc
  3. Operation Manual ...1pc
  4. Windscreen ...1pc
  5. Batteries ...4pc

Need to have this new Shimana SHGLSL021 Multifunctional Leq Sound Level Meter calibrated? While this gauge has passed a quality control check, having a calibration certificate for sound level meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana sound level meters (Shimana SHGLSL021 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
SHGLSL021Shimana Multifunctional Leq Sound Level Meterpiece 5

More Recommendations for Sound Level Meters