Moisture Meters Shimana Moisture Meters for Building Materials
Moisture Meters for Building Materials
Part#: SHSEMM138
Supplier: Shimana
Calibration Certificate: is available at extra cost
Moisture Meter for Building Materials User Manual (250,93 KB)
Photo Gallery - click any photo to enlarge
SHSEMM138 from Shimana Instruments Canada is the perfect instrument to check the moisture content in drywalls, wood and other building materials with virtually no surface damage thanks to the pinless moisture sensor. High frequency sensing technology allows the Shimana SHSEMM138 to take non-invasive moisture measurements.
The non-destructive moisture sensor of SHSEMM138 runs smoothly over the surface being tested without scratching or penetrating the surface User programmable alarms alert the user if moisture measurements exceed alarm set-points. The SHSEMM138 measures relative moisture of various building material including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology.
In Canada you can buy the Shimana SHSEMM138 moisture meter for building materials from our ProcessInstruments.ca. We ship most of the orders same day, from our Brampton, ONtario warehouse. Local pick-up for the GTA (Toronto, Brampton, Missisauga, Oakville) is free, just give us a call to have the instrument checked and ready! Other measuring instruments from Shimana are available on this manufacturer page.
features
Relative pinless moisture reading for non-invasive measurement from 0.0 to 100.0 with 0.1 resolution
Multifunction backlit triple LCD display
Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
High frequency sensing technology
Automatic Data Hold
Two adjustable alarm levels with audible beeper and visual (flashing “RISK” or “WET”) indicators
Automatic calibration (in dry air) when meter is powered on
Low battery indication
Auto Power off
specifications
Function
Range
Accuracy
Moisture Range
0.0 to 100.0% Moisture Content
Relative only
Measurement Depth
20 to 40mm (0.79 to 1.57”)
Display type
Backlit LCD
Display digits
Three (3) numeric displays; each displaying from 0.0 to 100.0
Display icons
HOLD, DRY, RISK, WET, MIN, MAX and low battery icon
Moisture Comparison Table typical values for building materials
Material
Display units
Moisture status
Gypsum
< 30
DRY
30-60
RISK
> 60
WET
Cement
< 25
DRY
25-50
RISK
> 50
WET
Wood
< 50
DRY
50-80
RISK
> 80
WET
SHSEMM138 is the perfect hand held tool to check the humidity in building materials. This is a non-destructive, non-invasive, pinless moisture meter for building materials, walls, drywalls, wood, gypsum, cement, ceilings and floors. We do, however, carry a wide range of moisture meters in Canada for other type of materials like: wood moisture meter, grain moisture meter or pin-and-search moisture meter for building materials.
standard delivery
Shimana SHSEMM138 moisture meter 1pc
User manual 1 pc.
3 AAA batteries
Need to have this new Shimana SHSEMM138 Moisture Meters for Building Materials calibrated? While this gauge has passed a quality control check, having a calibration certificate for moisture meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.
Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana moisture meters (Shimana SHSEMM138 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.
Shimana Moisture Meters for Building Materials
Moisture Meter for Building Materials User Manual (250,93 KB)
