This Digital Force Gauge is one of the world's smallest, rugged, economical and versatile force gauges. Its ergonomic design makes this gauge a friendly instrument to the human hand. With just the touch of a button you can measure force in any engineering units desired, i.e. lbs, kgs or N. Any force from a few oz. up to 500 lbs can be accurately measured with one of the FGV family gauges. The FGV-HX Digital Force Gauges series offers an RS232C and an analog output port for further processing the displayed measurements. The unit's microprocessor enables it to measure forces very accurately in the "average" or "peak" mode. Its LCD display is smartly designed to inform the operator at all times of exactly what is going on. If the hanger is used or a test stand, reversing the display so that it can be read right-side-up is a cinch. Just press two buttons and the digits and units indicators reverse themselves instantly. To obtain accurate, repeatable results, use this force gage with the Shimpo FGS Motorized Test Stands. features -
Reversible display -
Outstanding accuracy (±0.2% F.S.) -
Peak measurement -
Rechargeable batteries -
Field calibration through keypad -
Overload capacity: 200% F.S. -
Overload output signal (FGV-HX models) -
RS232C and analog outputs (FGV-HX models) -
Variable units of measure (lbs, kgs or N) -
Heavy-duty load sensor -
Rugged die-cast aluminum housing -
Two heavy-duty “knurled” steel handles -
Removable hanger -
Measures both compression and tension forces -
Auto power shut-off -
Low battery indicator -
Ergonomically designed dimensionsspecs | Accuracy | ±0.2% full scale | | Resolution | 0.1 lb, 0.1 Kg, 1 N | | Display | 4-Digit LCD, 12mm high. Reversible by the push of a button. Minus sign for tension | | Display Update | 0.05, 0.1, 0.2, 0.3, 0.5, 1 sec | | Sampling Rate | 1000 times per second | | Overload Protection | 150% of full scale | | Power | Rechargeable Ni-Cad battery or AC through adapter/charger | | Auto Power Shut-Off | Yes (not active if adapter/charge is in use) | | Battery Life | 12 hours (when fully charged) | | Recharge Time | Approximately 18 hours when fully discharged | | Dimensions | 8.43" L x 3.23" W x 2.15" H (214 mm x 82 mm x 54.5 mm) | | Weight | 2 lb (900 g) | | Approvals | CE approved | | Outputs | RS232C & Analog Output ±1 VDC (through a 12 bit D/A converter) | | Overload Output | One NPN OC transistor for tension, one NPN OC transistor for compression | what's included -
Digital force gauge -
AC adapter/charger -
2 handles -
attachments (flat head, hook, chisel, notched head, cone head, extension rod) -
RS232 CABLE -
carrying case.
|
Shimpo FGV Digital Force Gauges
