Force Gauges arrow Shimana Accurate Digital Force Gauges

Accurate Digital Force Gauges



Part#: SHWSFG Series
Supplier: Shimana
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

Shimana force gauges are easy to use, affordable, but with good resolution and high accuracy. These are economical force gages which can be used not only for simple measurement of tension/compression force but also used for various testing purpose; such as switch test, connector insertion/withdraw test, and fracture test, etc.

We are a canadian suplier of digital force gauges and other force measuring products. DMM is located in Brampton (Great Toronto Area) Ontario. Our calibration lab is accredited to ISO 17025 to perform Force Calibration Services.

Two types of digital force gauges available, with different capacities and resolutions:

  • integral loadcell
  • remote load sensor

both with a measurement accuracy of better than ±0.5% full scale. For complete specs please see the Ordering table below.

features

  • High accuracy & good resolution
    • Accuracy: ±0.5% FS
    • Min Resolution: 0.001N
  • Peak hold function: catch and Hold the peak value in test;
  • Peak hold and auto-release function: catch the peak value and show it on display 1-10 seconds, then release the value and ready for the next peak;
  • Memory function: keep 10 groups of data, and calculate the average;
  • Unit conversion: It is possible to convert the graduations of N, kgf, and lbf automatically;
  • LCD screen turn direction function: press the unit key for 3 seconds, the LCD screen will change its direction;
  • Compare function: initial input of the tolerance limit(Max/Min) enables the device to judge the measured result as GO (Green pilot lamp)/NG(Red pilot lamp);
  • Automatic power off: the SH force gauges series have automatic power off function to save battery and keep the gauge safe. Power off time can device 1-60 minutes by yourself;
  • RS-232C output: RS-232C output,it can transmit the data to Printer or computer, save it into, then analysis a "Excel" and print it directly;

 dimensions

Digital Force Gauge Dimensions

specs

please see the table below


Need to have this new Shimana SHWSFG Series Accurate Digital Force Gauges calibrated? While this gauge has passed a quality control check, having a calibration certificate for force gauges might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana force gauges (Shimana SHWSFG Series or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Capacity Resolution Accuracy SensorIn Stock
SHWSFG102200N Digital Force Gauge 200N / 45 lbf 0.1N 0.5% Integral 2
SHWSFG103500N Digital Force Gauge 500N / 112lbf 0.1N 0.5% Integral 2
SHWSFG1751000N Digital Push Pull Gauge 1000N / 224lbf 0.5N 0.5% w/ Remote 1
SHWSFG21710N Digital Force Gauge 10N / 2.24lbf 0.005N 0.5% Integral 2

More Recommendations for Force Gauges