Electrical Testers arrow Fluke 600V OpenJaw Electrical Tester

600V OpenJaw Electrical Tester



Part#: T5-600
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This 600V Electrical Tester - FLUKE T5-600 let you check voltage, continuity and current with one compact tool.  It comes with OpenJaw™ current so you can check current up to 100A without breaking the circuit whereas it’s detachable SlimReach™ probe tips are fully customized for national electrical standards. Volts indicator LED threshold is guaranteed on by 30 V ac. FLUKE T5-600 can be also used for resistance measurements in a range of 0 to 1000 Ω.

Despite his versatility, the FLUKE T5-600 features compact design with neat probe storage and is rugged enough to withstand a 10-foot (3m) drop.

Features

  • Automatically measures volts AC and volts DC with precise digital resolution
  • Displays resistance to 1000 Ω
  • Easy and accurate OpenJaw™ current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10 ft (3 m) drop
  • Detachable SlimReach™ probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • 600 V model
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads
  • AC current
  • Display hold

Specifications

Jaw opening 12.9 mm (0.5 in)
Max wire size 1/0 THHN Cable
Current range AC rms 0 to 100.0 A
Accuracy AC current (50/60 Hz) 3% ± 3 counts
AC response Averaging
Voltage range AC/DC 0 to 600 V
Voltage accuracy AC 1.5% ± 2 counts
DC 1% ± 1 count
Resistance range 0 to 1000 Ω
Continuity beeper threshold On at < 25 Ω, off at > 400 Ω
Volts indicator LED threshold Guaranteed on by 30 V AC
Environmental Specifications
Operating temperature -10°C to 50°C
Storage temperature -30°C to 60°C
Humidity (without condensation) 0% to 95% (5°C to 30°C);
0% to 75% (30°C to 40°C);
0% to 45% (40°C to 50°C)
Dust/water resistance Yes
Operating altitude 2000 meters max
Temperature coefficient 0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
Safety Specifications
Overvoltage category CAT III 600 V AC/DC (EN61010-1)
Agency approvals UL, CSA, and VDE
Maximum voltage Between any terminal and earth ground
Mechanical and General Specifications
Size 30.5 x 51 x 203 mm
Weight 300 g
Warranty Two-years
Battery life 200 hour zinc chloride, 400 hour alkaline
Battery type 2 x AA
Low battery indicator Yes
Current sensor opening 12.9 mm
Calibration cycle 1 year
Test leads Type Heavy duty, flexible leads rated for 1000 V use.
Field replaceable leads terminate in male shrouded banana plugs
Probes One red, one black.
Detachable Slim-Reach™ probe tips
Styles TP1 Slim Reach™ Test Probes

Need to have this new Fluke T5-600 600V OpenJaw Electrical Tester calibrated? While this gauge has passed a quality control check, having a calibration certificate for electrical testers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke electrical testers (Fluke T5-600 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
T5-600Fluke 600V OpenJaw Electrical Testerpiece 0

More Recommendations for Electrical Testers