Electrical Testers arrow Fluke 1000V Voltage, Continuity and Current Tester

1000V Voltage, Continuity and Current Tester



Part#: T5-1000
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

With 1000V Electrical Tester - FLUKE T5-1000 you can check voltage, continuity and current using one single compact instrument up to 100 A without breaking the electrical circuit. Fluke T5-1000 features OpenJaw™ current, Detachable SlimReach™ probe tips and displays resistance to 1000 Ω.

Using FLUKE T5-1000 is just as easy. All you have to do is select volts, ohms, or current and the tester does the rest. The T5 can stay connected much longer than solenoid type tester and has automatically off to conserve energy. Its tough test leads stow neatly in the back of the tester, making it easy to carry the T5 in your tool bag. Despite his versatility, the FLUKE T5-1000 features compact design with neat probe storage and is rugged enough to withstand a 10-foot (3m) drop. 

Features

  • Automatically measures volts AC and volts DC with precise digital resolution
  • Displays resistance to 1000 Ω
  • Easy and accurate OpenJaw™ current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10 ft (3 m) drop
  • Detachable SlimReach™ probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • 1000 V model
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads

Specifications

Specifications
Continuity Beeper Threshold On at < 25 Ω, off at > 400 Ω
Volts Indicator LED Threshold Guaranteed on by 30 V AC
Environmental Specifications
Operating Temperature -10°C to 50°C
Storage Temperature -30°C to 60°C
Humidity (Without Condensation) 0% to 95% (5°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 50°C)
Dust/Water Resistance Yes
Operating Altitude 2000 m max
Temperature Coefficient 0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
Safety Specifications
Overvoltage Category 1000 V AC/DC, CAT III
600 V AC/DC, CAT IV
Agency Approvals UL, CSA, and VDE
Maximum Voltage Between any terminal and earth ground
Mechanical and General Specifications
Size 30.5 x 51 x 203 mm
Weight 300 g
Warranty 2 years
Battery Life 200 hour zinc chloride, 400 hour alkaline
Battery Type Two AA zinc chloride
Low Battery Indicator Yes
Current sensor opening 12.9 mm
Calibration cycle 1 year
Test leads Type Heavy duty, flexible leads rated for 1000 V use.
Field replaceable leads terminate in male shrouded banana plugs
Probes Two tips – one red, one black
Detachable Slim-Reach Test probe tips in one
Styles TP1 Slim Reach Test Probes

Need to have this new Fluke T5-1000 1000V Voltage, Continuity and Current Tester calibrated? While this gauge has passed a quality control check, having a calibration certificate for electrical testers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke electrical testers (Fluke T5-1000 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
T5-1000Fluke 1000V Voltage, Continuity and Current Testerpiece 0

More Recommendations for Electrical Testers