Digital Multimeters arrow Fluke Remote Display Multimeter

Remote Display Multimeter



Part#: 233
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The Fluke 233 with a removable display finds more problems in unusual measurement scenarios than any other comparable digital multimeter can do! The display of Fluke 233 Multimeter is removable which allows you to be in double places as once. This feature is great when you need a second pair of hands to make a measurements, where machines or electric panels are physically separated from the limit switch or isolation. It is also handy when you need to take measurements in area that you can be in, such clean room or hazardous areas. Simply pop the display back on and you have a conventional multimeter again!

Features

  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 50 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
  • Use as a conventional multimeter when the display is connected
  • Radio transmitter automatically turns off when the display is connected to the meter
  • Auto power off maximizes battery life
  • Min/Max and Average recording to capture variations automatically
  • Test continuity and diodes
  • Easy to read display with large digits and bright backlight
  • Battery life approximately 400 hours

 Specifications

Accuracy specifications
DC voltage Range 0.1 mV to 1000 V
Accuracy 0.25 % + 2
AC voltage Range 0.1 mV to 1000 V
Accuracy 1.0 % + 3
DC current Range 1 mA to 10 A
Accuracy 1.0 % + 3
AC current Range 1 mA to 10 A
Accuracy 1.5 % + 3
Resistance
Range  0.1 Ω to 40 MΩ
Counts 6000
Capacitance Range: 1 nF to 9999 μF
Resolution: 1nF
Frequency Range: 5 Hz to 50 kHz
Resolution: 0.01Hz
Temperature -40 °C to +400 °C
Power AA batteries: Three for main body; two for display
Battery life 400 hours
Wireless frequency 2.4 GHz ISM Band 10 meter range
Safety rating CAT IV 600 V , CAT III 1000 V
General specifications
Basic features AC true-rms with Auto/Manual Ranging
Display Backlight
Data storage Min/Max/Avg Yes
Other features Battery type AA alkaline
Removable display
Warranty and protection Safety rating CAT IV 600 V/CAT III 1000 V
External protection Rubber overmold
Warranty Three-years
Size (H x W x L) 5.3 cm x 9.3 cm x 19.3 cm (2.08 in x 3.6 in x 7.6 in)
Weight 604 g (1.3 Ib)

Need to have this new Fluke 233 Remote Display Multimeter calibrated? While this gauge has passed a quality control check, having a calibration certificate for digital multimeters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke digital multimeters (Fluke 233 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
233Fluke Remote Display Multimeterpiece 0

More Recommendations for Digital Multimeters