Digital Multimeters arrow MTP Automotive Multimeter

Automotive Multimeter

Part#: 1551
Supplier: MTP
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge


  • LCD display of 4000 counts
  • Low battery indicator
  • Auto power off after 30 minutes
  • CATIII 1000V / CATIV 600V
  • IEC 1010-1, EN61010-1
  • Included accessories: 1 x 9V battery, test leads, type K temperature probe, inductive pick-up


  • Insulation : Class 2, Double isolation
  • Overvoltage category : CAT III 1000V / CAT IV 600V
  • Display : 4000 count LCD display with function indication
  • Polarity : Automatic, (-) negative polarity indication
  • Overrange : ʺOLʺ symbol is displayed
  • Response rate 0.5 seconds approx.
  • Low battery indication: ʺBATʺ symbol is displayed when the battery voltage drops below the operating level
  • Measurement rate : 2 times per second, nominal
  • Auto power off : Meter automatically shuts down after approx. 30 minutes of inactivity;
  • For inside use : Max height : 2000m
  • Pollution degree : 2
  • Operating Temperature 32ºF to 122ºF (0ºC to 50ºC)
  • Operating Humidity Max 80% RH
  • Storage temperature : -20ºC to 60ºC (-4ºF to 140ºF) Relative Humidity < 80%
  • Power Supply: 9V battery
  • Weight: 182g
  • Size: 164 x 50 x 40mm
  • Infrared Thermometer Specifications
  • Range: -30 to 550ºC / -22 to 1022ºF
  • Output: 1mV ± 1ºC or 1ºF
  • Accuracy ± 2% of reading or ± 4ºF (2ºC), whichever is greater.
    Accuracy is specified for the following ambient temperature range : 64 to 82ºF (18 to 28ºC)
  • Emissivity: 0.95 fixed value
  • Field of View D/S = approx. 8 :1 ratio (D = Distance, S = Spot (Has 90% encircled energy at the focal point)
  • Laser Power: Less than 1mW
  • Spectral Response: 6 to 14µm (wavelength)

Need to have this new MTP 1551 Automotive Multimeter calibrated? While this gauge has passed a quality control check, having a calibration certificate for digital multimeters might be required by your quality control system. Digital Measurement Metrology (owner of is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP digital multimeters (MTP 1551 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
1551MTP Automotive Multimeterpiece 0

More Recommendations for Digital Multimeters