Clamp Meters arrow Fluke Milliamp Process Clamp Meters
From: $822.00

Milliamp Process Clamp Meters



Part#: 771/772/773
Supplier: Fluke
Calibration Certificate: is available at extra cost
Milliamp Process Clamp Meters (1,31 MB)
Photo Gallery - click any photo to enlarge

These Fluke Milliamp Process Clamp Meters feature the best in class 0.2% accuracy . The Fluke 773 mA clamp meter can measure 4 to mA signals without breaking the loop. Is very useful for troubleshooting the current loop. The Fluke 773 allows sourcing of a signal, providing fast verification of new wiring. This Fluke Process Clamp Meter has a mA loop and V dc source built in and the ability to measure a 4-20mA signals.

General specifications:

  • Diameter of measurable conductor: 0.177 in or 4.5 mm max
  • Operating temperature: -10 to 50°C
  • Operating humidity: < 90% @ < 30°C, < 75% @ 30 to 55°C
  • Operating altitude: 0 to 2000 m
  • IP rating: IP 40
  • Vibration: Random 2 g, 5 to 500 Hz
  • Shock: 1 m drop test (except the jaw)
  • EMI/RFI: Meets EN61326-1 (For current measurement w/ JAW, add 1 mA to specification for EMC field strengths of 1 V/m up to 3 V/m.)
  • Temperature coefficient: 0.01% °C (< 18°C or > 28°C)
  • Power, battery life: (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
  • Warranty: Three years for electronics 
  • One year for cable and clamp assembly

mA measurement 
(measured by clamp)

Resolution / range

0 to 20.99 mA

FLUKE771
FLUKE772,  FLUKE773

Accuracy

0.2% + 5 counts

Resolution / range

21.0mA to 100.0 mA

Accuracy

1% + 5 counts

mA measurement (measured in series with test jacks)

Resolution / range

0 to 24.00 mA

FLUKE772, FLUKE773

Accuracy

0.2% + 2 counts

mA source
(maximum mA drive: 24 mA into 1,000 ohms)

Resolution / range

0 to 24.00 mA

Accuracy

0.2% + 2 counts

mA simulate
(maximum voltage 50 V dc)

Resolution / range

0 to 24.00 mA

Accuracy

0.2% + 2 counts

Voltage source
 (2 mA maximum drive current)

Resolution / range

0 to 10.00 V DC

FLUKE773 only

Accuracy

0.2% + 2 counts

Voltage measure

Resolution / range

0 to 30.00 V DC

Accuracy

0.2% + 2 counts


Need to have this new Fluke 771/772/773 Milliamp Process Clamp Meters calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke clamp meters (Fluke 771/772/773 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription DetailsPriceIn Stock
771Fluke 771 Measures, tests, and troubleshoots 4-20 mA control signals $822.00  1
772Fluke 772 measures output signals, and adds loop power $1,233.00  1
773Fluke 773 measures output signals, and adds simultaneous mA source/measure $1,781.00  1

More Recommendations for Clamp Meters

MTP Economical Clamp Meters

From: $91.00
Part#: 3093 and 3094

Fluke True RMS Wireless HVAC Clamp Meter

Price: $409.00
Part#: 902 FC

MTP True RMS Clamp Meters

From: $156.00
Part#: 3095 and 3096