Clamp Meters arrow Fluke 400A AC True RMS Clamp Meters

400A AC True RMS Clamp Meters



Part#: 320 Series
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The Fluke 320 Series of True RMS clamp meters feature True-rms ac voltage and current  measurements and a slim, ergonomic design for comfortable all-day use.  Whether you choose to measure AC Current, AC and DC voltage, True-rms AC voltage and current for accurate measurements on non-linear signals, resistance, frequency, temperature or capacitance  the Fluke 320 series is the best general troubleshooting tools for commercial and residential electricians.

These meters were built in accordance to CAT IV 600 V, CAT III 1000 V electrical measurement categories, which mean troubleshooting is now more comfortable and free from danger.

The FLUKE 324 and FLUKE 325 models offer a backlighted display for easy viewing in any setting, contact temperature readings from 10 to 400 degrees C (14 to 752 degrees F) and capacitance measurements from 100 to 1000 microfarad.

Available models:

  • Fluke 323: The best option for general, grab-and-go troubleshooting needs.
  • Fluke 324: General electrical measurements with temperature and capacitance capabilities.
  • Fluke 325: Big ac/dc features in a small form factor.

Features

  • Slim, ergonomic design
  • CAT IV 300V/CAT III 600 V safety rating
  • 400 A AC current measurement
  • 600 V AC and DC voltage measurement
  • True RMS AC voltage and current for accurate measurements on non-linear signals
  • Resistance measurement up to 4 kΩ with continuity detection
  • Two-year warranty
  • Soft carrying case

Specifications

Fluke 323 Fluke 324 Fluke 325
AC current Range 400.0 A 40.00 A/400.0 A 40.00 A/400.0 A
Accuracy 2 % ± 5 digits
(45 Hz to 65 Hz)
2.5 % ± 5 digits
(65 Hz to 400 Hz)
1.5 % ± 5 digits
(45 Hz to 400 Hz)
Note: Add 2 % for
position sensitivity
2 % ± 5 digits
(45 Hz to 65 Hz)
2.5 % ± 5 digits
(65 Hz to 400 Hz)
DC current Range - - 40.00 A/400.0 A
Accuracy - - 2 % ± 5 digits
AC voltage Range 600.0 V 600.0 V 600.0 V
Accuracy 1.5 % ± 5 digits 1.5 % ± 5 digits 1.5 % ± 5 digits
DC voltage Range 600.0 V 600.0 V 600.0 V
Accuracy 1.0 % ± 5 digits 1.0 % ± 5 digits 1.0 % ± 5 digits
Resistance Range 400.0 Ω/ 4000 Ω 400.0 Ω/ 4000 Ω 400.0 Ω/ 4000 Ω/ 40.00 kΩ
Accuracy 1.0 % ± 5 digits 1.0 % ± 5 digits 1.0 % ± 5 digits
Continuity ≤ 70 Ω ≤ 30 Ω ≤ 30 Ω
Capacitance - 100.0 μF to 1000 μF 100.0 μF to 1000 μF
Frequency - - 5.0 Hz to 500.0 Hz
AC response True-rms True-rms True-rms
Backlight - Yes Yes
Data hold Yes Yes Yes
Contact temperature - -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F)
-10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F)
Min/Max - - Yes
Size H x W x D (mm) 207 x 75 x 34 207 x 75 x 34 207 x 75 x 34
Max wire diameter 30 mm (600 MCM) 30 mm (600 MCM) 30 mm (600 MCM)
Weight 265 g 208 g 283 g
Category rating CAT III 600 V
CAT IV 300 V
CAT III 600 V
CAT IV 300 V
CAT III 600 V
CAT IV 300 V
Warranty Two-year Two-year Two-year

Need to have this new Fluke 320 Series 400A AC True RMS Clamp Meters calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke clamp meters (Fluke 320 Series or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Min/Max Contact TemperatureIn Stock
323True RMS Clamp Meter No No 2
324True Rms Clamp Meter W/Temp No -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F)
1
325True Rms Clamp Meter W/Temp Yes -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F)
0

More Recommendations for Clamp Meters