Clamp Meters arrow Fluke 200A True-rms AC/DC Clamp Meter (detachable jaw)

200A True-rms AC/DC Clamp Meter (detachable jaw)



Part#: 365
Supplier: Fluke
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

Fluke 365 AC DC Clamp Meter is everything you need for jobs where access to wires is difficult. Thanks to both innovative small detachable jaw with a flexible lead as well as its built in flashlight/torch for easy illumination and identification you gain access to wires in tight compact spaces and viewing the display easier than ever.

With advanced performance, these Fluke 365 Clamp Meters are designed to be simple to use and gimmick-free. State of the art signal processing allows for use in noisy electrical environments while providing stable electrical readings.

Measurement capability

  • 200 A ac and dc current measurement with detachable jaw
  • 600 V ac and dc voltage measurement
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • 6000 Ω resistance measurement with continuity detection

Features

  • Detachable jaw makes accessing wires and viewing the display easier
  • Built in flashlight/torch allows for easy illumination and identification of wires
  • CAT III 600 V safety rating
  • Compact design fits in your hand and can be used while wearing personal protective equipment
  • State of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement

Specifications

  • Diameter of measurable conductor: 0.71 in or 18 mm max
  • Operating temperature: -14 to 122ºF (-10 to 50ºC)
  • Storage temperature: -40 to 140ºF (-40 to 60ºC)
  • Operating humidity: < 90% at 10 to 30ºC, < 75% at 30 to 40ºC
  • Operating altitude: 0 to 2000 m
  • Size: 225 x 65 x 46 mm, (8.858 x 2.559 x 1.811 in.)
  • Weight: 275 g, (10 oz.)
  • Temperature coefficient: 0.01% ºC (< 18ºC or > 28ºC)
  • Three-year warranty
  • Soft case

Need to have this new Fluke 365 200A True-rms AC/DC Clamp Meter (detachable jaw) calibrated? While this gauge has passed a quality control check, having a calibration certificate for clamp meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Fluke gauge to be calibrated? We might be able to calibrate Fluke clamp meters (Fluke 365 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
365Fluke 200A True-rms AC/DC Clamp Meter (detachable jaw)piece 0

More Recommendations for Clamp Meters